VEVOR Kegerator (BM-162) review

Intro

The VEVOR BM-162 kegerator is positioned as a full-size draft beer fridge for home bars, garages, and light commercial use. The listing describes a 162-liter interior, a digital temperature range from 23°F to 82.4°F (−5 to 28°C), a compressor with automatic defrost, and a kit that includes a 5 lb CO2 cylinder (empty) and draft hardware. Owner feedback shows the kegerator often cools well, but multiple buyers report problems with couplers, tubing length/quality, and some flimsy or missing pieces out of the box. This review walks through what the listing promises, how owners say it behaves in daily life, build and safety signals to watch, and whether it fits the kind of cook or host you are.

What it is / first look

The BM-162 is a freestanding keg refrigerator and beer dispenser sold by VEVOR. From the listing: it has a 162L capacity, dimensions of 23.7 x 29.1 x 52.4 inches, weighs 88.2 pounds, and runs on 110 volts. The product is available as a one-tap or two-tap system and is shown in a silver finish.

Key listing claims

• Temperature range: 23°F–82.4°F (−5 to 28°C) with a digital display and memory function for power outages.
• Cooling: described as having a "high-quality compressor" and an air cooling system for rapid cooling and low-temperature preservation.
• Automatic defrost: the listing states the unit automatically defrosts every 215 minutes for 30 minutes.
• Capacity: roomy interior that can accommodate two 5-gal sixth-barrel kegs, one 7.75-gal quarter-barrel keg, or one full-size keg; includes an internal shelf so part of the fridge can be used for other items.
• Kit contents: beer hose (listed as an extended 59"/1.5 m hose), beer tap, beer column, an empty 5 lb CO2 cylinder and holder (internal or external placement), spare hose and clamp, drip tray, guard rail, installation tools, and casters (four swivel casters, two with brakes).

First impressions from owners

Owners commonly report the unit arrives mostly assembled and includes the listed hardware, but several also describe missing parts on arrival or hardware that required replacement. Packaging issues (for example, delivery on its side) and door/support damage were reported by some buyers. Several owners praise the cooling performance and the convenience of the included CO2 cylinder (not filled), while others found assembly instructions sparse.

In daily use

How the BM-162 behaves day-to-day depends a lot on the setup, which appears to be where the majority of owner friction happens. Below are the core day-to-day use notes synthesized from the listing and owner feedback.

Pouring and foam control

The listing calls out an extended 59" / 1.5 m beer hose intended to ensure proper foam, but several owners report persistent foaming. Multiple buyer reports point to the supplied tubing being too short or otherwise not optimal for proper pour dynamics, which led them to replace the factory tubing with longer lines (examples cited by owners: 10 ft lines) to fix foaming. One owner detailed that after installing longer tubing they went from foamy pours to "perfect pints." If you need a crisp, low-foam pour right away, plan on checking tubing length and the coupler gasket immediately after setup.

Temperature control and reliability

The kegerator's digital controller is described in the listing as precise, offering a wide temperature band (23°F–82.4°F) and a memory function to restore the previous temperature after power outages. Owners generally report the unit keeps beer cold; some say it maintained good temps over a year of use and even in a warm garage. A few owners mention the temperature dipped below freezing at times and that the display shows the current temperature but not necessarily the setpoint, which made dialing in the exact target less intuitive.

Setup and installation notes

The listing includes installation tools and the spare parts described above, and several owners said setup was relatively straightforward but took about an hour. However, owner reports also list missing parts on arrival, a leaking coupler or bad gasket, and one review that required buying extra hardware to complete the installation. The printed instructions are described as usable but not particularly detailed; some owners wanted more step-by-step guidance.

Mobility and placement

The unit ships with four swivel casters, two of which have brakes. Owners called this convenient for moving the fridge during setup or cleaning, and the brakes help stabilize it once in place. The listing includes a holder for external CO2 tank placement, which preserves interior space when preferred.

Noise and environment

The listing highlights a compressor-based cooling system. Owners reporting on environment note it kept kegs cold in a garage. The listing specifies 110 volts. The product's weight (88.2 lb) and dimensions should be considered for where it’s sited—measure before delivery if you’re tight on space.

Materials & build quality

Material specifics such as cabinet shell composition, interior lining materials, or whether fittings are metal versus plastic are not provided in the listing. The listing describes a "high-quality compressor" and an "air cooling system," and the unit is shown in a silver finish.

Owner experiences provide important color on build quality:

• Positive: Several owners report solid cooling performance and an interior large enough for two smaller kegs or one full keg plus shelf use. A few owners noted the included parts let them get a keg running immediately (with the provided empty CO2 cylinder).
• Negative / mixed: Multiple owners reported leaky couplers or gaskets on arrival and had to replace or retrofit couplers. Others described the supplied tubing as thin or aquarium-style and replaced it with longer, more appropriate beer lines. A few buyers reported the door support or door itself arriving damaged or the door falling off in unpacking. One buyer reported a plastic tap handle that began to strip inside after a month.

Putting these signals together: the chassis and compressor appear functionally adequate for maintaining temperature (owners repeatedly say it keeps beer cold), but the supplied beverage plumbing and some small hardware seem to be cheaper or less robust than buyers expect for a product at this scale. Expect to inspect couplers, gaskets, and tubing and have replacements or upgrades on hand if you want a more reliable long-term pour setup.

Safety considerations

Safety in a kegerator covers electrical, pressurized-CO2 handling, and mechanical mounting/assembly. The listing provides a few safety-relevant facts: the unit runs on 110 volts, includes a 5 lb CO2 cylinder that is provided empty, and includes a hose clamp and gasket intended to prevent leaks. It also has a memory function for temperature after power outages and an automatic defrost cycle described by the listing.

Owner reports raise some specific safety-adjacent flags to watch for:

• Leaking couplers and gaskets: Several owners describe coupler/gasket leaks during setup or use. Any leaked beer or gas can be messy and impacts both safety and performance — check couplers and gaskets at setup and replace suspect parts promptly.
• Supplied tubing quality: Some owners say the included beer tubing is more like aquarium hose, and one review explicitly warned it shouldn’t be used as a gas line. The listing itself describes a 59" beer hose for pouring, but owners replaced it with longer, thicker lines. Verify tubing fittings and intended use before connecting your CO2 cylinder and draft lines.
• Loose or damaged door hardware: At least one owner reported the door fell off during unpacking and another reported delivery-related damage. A loose door can be a tipping or injury hazard depending on placement and handling; check hinges and fasteners as soon as you unpack the unit.
• Tap hardware wear: A buyer reported an internal stripping of a plastic tap handle after a month. Weak or degrading hardware can lead to sudden failure during use—inspect tap handles and replace plastic parts with metal replacements if you’re concerned about durability.

Practical safety actions before you pour:

• Inspect couplers, gaskets, and hose clamps for leaks; have replacement gaskets and clamps ready.
• Verify what the included tubing is rated for—if in doubt, replace with food-grade, beer-rated tubing of the correct inner diameter and length.
• Confirm the CO2 cylinder is empty on arrival (the listing says it is empty) and follow your local refill/exchange procedures for a charged tank; store CO2 per manufacturer guidance and local codes.
• Make sure the unit is placed on a stable, level surface and the casters' brakes are engaged when in use.
• Follow the included installation manual and verify electrical requirements (110V) before plugging in. If you’re unsure about electrical or pressurized-gas setups, consult a qualified professional.

Who this is for / who should skip

Match the BM-162 to the right user and skip it if it doesn't fit your expectations.

Good fit

• Home hosts and hobbyists who want a full-size kegerator with a flexible interior—the listing claims enough room for multiple common keg sizes and a shelf for fridge use.
• Buyers who want digital temperature control and a wide temperature range (23°F–82.4°F) with a memory function for power outages, per the listing.
• People who prefer a largely complete kit on arrival: the listing includes a CO2 tank (empty), beer hose, tap, column, spare hose/clamp, drip tray, guard rail, and installation tools.
• Users who are comfortable swapping or upgrading draft lines, couplers, and small hardware if they want more durable fittings or longer tubing for better pour control.

Who should skip or be cautious

• Anyone who expects a perfect turnkey, commercial-grade draft setup out of the box with premium couplers and tubing—owner feedback repeatedly describes needing to replace or upgrade parts like tubing and couplers.
• Buyers who cannot or will not inspect and possibly replace small fittings or who need close vendor support; at least one buyer called out poor customer contact and missing parts on arrival.
• Environments where you cannot safely manage an 88.2 lb appliance or place it level—check doorway and placement dimensions first (23.7 x 29.1 x 52.4 inches listed).

Verdict

The VEVOR BM-162 kegerator lists an attractive feature set for a home draft fridge: a fairly large 162L interior, a high/low-capable temperature range with digital control and a memory function, automatic defrost, and a kit that includes most of the parts a beginner needs—including an empty 5 lb CO2 cylinder. Owners overwhelmingly confirm the unit’s core job: keeping beer cold. That’s the most important part of a kegerator, and the compressor-based system appears to deliver on that promise.

Where the BM-162 falls short—based on repeated owner feedback—is in the plumbing and small hardware. Multiple buyers reported leaking couplers, a tubing setup that produced excessive foam, and some delivery/assembly issues (missing parts, door hardware problems, and a plastic tap handle that stripped internally). Those complaints don’t necessarily mean every unit will have problems, but the pattern is clear enough that a cautious buyer should expect to verify plumbing and fittings on day one and budget for replacement beer lines and possibly a coupler or two if you want a reliable, low-foam pour.

Check before you buy

• Confirm the interior dimensions (162L) will fit your keg(s)—the listing states two 5-gal sixth-barrels, one 7.75-gal quarter-barrel, or one full-size keg are supported.
• Verify the unit voltage (listed as 110 volts) and that your location can accommodate the weight and footprint (23.7 x 29.1 x 52.4 inches; 88.2 pounds).
• Inspect the included coupler, gaskets, and hose clamps right away; consider having spare gaskets/clamps ready because owners report leaks on setup.
• Check the beer hose length and quality on arrival—owners reported replacing the supplied 59" hose with longer (example: 10 ft) beer-grade tubing to eliminate foaming.
• Confirm the CO2 cylinder is empty (the listing states the supplied 5 lb CO2 cylinder is empty) and plan how you will exchange/refill it safely.
• Look over the door hinges and hardware when unpacking—some owners reported delivery damage or door problems.
• Research customer-support options before purchase; at least one buyer reported difficulty getting timely help for missing parts.

Bottom line: If you want a mid-range full-size kegerator that generally holds temperature and includes most of the hardware to get started, the BM-162 can be a cost-effective choice—provided you’re prepared to inspect plumbing and small parts and swap in beefier lines or couplers if you want trouble-free pours. If you need a flawless, out-of-the-box commercial pour experience and hands-off customer support, plan to compare other models or factor in upgrades and spare parts.

FAQ

Does the kegerator come with a charged CO2 tank?

The listing states the unit includes a 5 lb CO2 cylinder, and the listing specifies that the CO2 cylinder is empty and does not contain CO2 gas.

What keg sizes will fit inside?

The listing describes the interior as able to accommodate two 5-gal sixth-barrel kegs, one 7.75-gal quarter-barrel keg, or one full-size keg. A shelf is included for partial refrigerator use.

What temperature range can I set, and does it remember settings after a power outage?

The listing gives a temperature range of 23°F to 82.4°F (−5 to 28°C) and notes a digital display with a memory function to maintain the previous temperature after power outages.

Does it have automatic defrost?

Yes—the listing states the kegerator automatically defrosts every 215 minutes for half an hour.

Is the included beer hose long enough to avoid foaming?

The listing calls the hose "extended" at 59" / 1.5 m, but multiple owners report that the supplied tubing was too short or unsuitable for proper pour dynamics and recommend replacing it with longer beer-rated tubing (owners mentioned using ~10 ft lines). Expect to check the hose length and consider upgrading if you see consistent foaming.

Does the display show the set temperature or just the current temperature?

The listing describes a digital display, but it doesn't specify whether the display shows the setpoint. Owner reports indicate the display shows the current temperature and that the setpoint isn't always visible or straightforward to read from the panel.

Are casters included for moving the unit?

Yes—the listing states the kegerator is equipped with four swivel casters and that two of them have brakes for stability.

What if parts are missing or damaged on arrival?

Some owners reported missing parts, delivery damage, or poor customer-support experiences. The listing says installation tools and spare parts are included, but if anything is missing or damaged the listing doesn't specify the returns/support process—verify the seller's current support options before purchase.