Shark Industrial PEX Ice Maker Connector Review

Intro

Quick-connect water lines and specialty hoses are the small pieces of hardware that either make a project painless or turn it into a weekend headache. The Shark Industrial PEX Tubing Icemaker Connector is marketed as a ready-to-install hose with 1/4" compression fittings on each end and PEX tubing construction. The listing calls this a single icemaker connector and highlights burst-proof durability plus compliance with industry standards.

This review pulls together what the product listing states and how owners describe the part in real use. The goal is practical: who this fits, what the listing actually guarantees, what owners report, and the safety/longevity signals to check before you buy.

What it is / first look

At a glance the Shark Industrial connector is a single PEX tubing icemaker hose with 1/4" compression fittings on both ends. The product's feature bullets describe it as "ONE premium PEX Tubing Icemaker Connector with 1/4" comp x 1/4" comp connection." The listing also calls the hose "burst proof" and says the PEX material can withstand high temperature and pressure, phrased as a product description from the listing.

Notable listing facts to bookmark:

• Connection: 1/4" comp x 1/4" comp (listed).
• Material type on the spec sheet: PEX tubing.
• Standards: the listing states compliance with ASME A112.18.6-2017/CSA B125.6-17 and NSF/ANSI 61,372.
• Unit count: 1; Included Components: No (listed in specifications).
• EU spare part availability: listed as 10 years.

One important listing inconsistency: the product title reads "25FT Premium PEX Tubing Ice Maker Water Connector," while the product copy in the "about" section refers to "One 8FT icemaker connector." That conflict appears in the listing and is worth confirming on the current product page before ordering.

In daily use

Owners' feedback in the supplied notes is uniformly positive in theme: the connector "fits" and "works great" for the setups they needed. That owner signal is the strongest operational clue we have — short, practical endorsements that the hose matches common icemaker hookups with 1/4" compression fittings.

Built-in refrigerators & ice makers

If your built-in fridge or under-counter ice maker accepts a 1/4" compression connection, the listing positions this connector as the direct-fit replacement or install hose. Owners repeatedly say the part offered a "perfect fit" for icemaker hookups and for tying into in-line water filters. Those mentions suggest this model is commonly used for the standard, narrow compression fittings found on many residential icemakers.

Inline water filters & short runs

Several owners mention using the hose as a link between an icemaker and an inline filter. The listing's unit count is one, so buyers should plan for a single run; the listing's text and images need to be checked to confirm the length you actually receive (again, the title/about conflict on length is important here).

Small kitchens and tight spaces

Because the product is described as a single icemaker connector and because owners report successful fits in common hookups, this is likely to be a tidy, space-saving hose for compact installations. The listing doesn't provide installation instructions or a detailed bend radius, so if your run is unusually tight or routed around sharp bends, verify the fit visually on the listing or consult the manufacturer documentation.

Materials & build quality

The listing identifies the material type as PEX tubing and the product copy claims the PEX is "very strong" and able to "withstand high temprature and pressure," calling the connector "extremely durable and lasting." Those are manufacturer/listing descriptions rather than independent lab-verified measurements; treat them as the brand's stated properties.

Standards and certifications listed on the product page are important clues to build expectations. The listing states compliance with the following industry references: ASME A112.18.6-2017/CSA B125.6-17 and NSF/ANSI 61,372. Those references — as presented in the listing — are the manufacturer claims about standards coverage for this part.

Owners' practical notes align with the listing claims: the most-cited positives are that it fits and "works great" for the projects buyers needed it for. There is no owner-reported pattern of premature failure in the supplied notes, but the dataset is limited to a handful of positive themes rather than long-term durability audits.

Safety considerations

Start with the listing's own safety-relevant claims. The product bullets present it as "BURST PROOF - Designed to last" and call out compliance with ASME and NSF/ANSI references. Those are manufacturer-stated safety signals; they suggest the part was designed and promoted with pressure- and drinking-water-related standards in mind, as listed.

Operational safety points to watch for when installing any icemaker connector (and things the listing does and doesn't specify):

• Fitting compatibility: the connector is listed with 1/4" compression fittings. Confirm that your appliance uses 1/4" comp fittings — owners report that this is the common setup the hose matched.
• Leak points and torque: the listing doesn't include installation torque specs or step-by-step guidance. The listing states Included Components: No and Unit Count: 1, so the package is just the hose unless the current listing says otherwise.
• Certifications: the listing explicitly names ASME and NSF/ANSI standards compliance. If you require third-party certificates or specific test documents, the listing advises reviewing the manufacturer's documentation or the current product page for supporting paperwork.
• Length ambiguity: the product title and the product copy list different lengths (25FT vs 8FT). Wrong-length connectors can lead to rushed connections or added fittings — double-check length before installation to avoid compromises that create leak risk.

Two final safety notes drawn from the supplied information: owners describe the part as fitting correctly (a positive for safe installation when the right fittings are used), and the listing asserts burst resistance. The listing does not provide a numeric pressure rating, temperature limits, or an installation manual in the supplied content; verify those details on the current listing or manufacturer documentation if they matter for your installation.

Who this is for / who should skip

Buy this if:

• Your icemaker or water appliance uses 1/4" compression fittings and you need a single PEX connector for a direct hookup. The listing specifies 1/4" comp x 1/4" comp and owners report it fit common hookups.
• You prefer a PEX tubing option and want a connector the listing describes as "burst proof" and compliant with ASME/NSF references (as the listing states).
• You only need a single run (Unit Count: 1) and the included components field is marked No, so you are prepared to supply any extra fittings or adapters yourself as needed.

Skip or confirm first if:

• Your appliance uses a different fitting size or thread type — this product is listed specifically for 1/4" compression connections.
• You need a specific length — the listing contains conflicting length information (product title vs product copy). Confirm the length on the seller's current page before ordering.
• You require detailed installation specs (torque numbers, pressure/temperature ratings) or certification paperwork beyond the standards listed; the supplied listing copy does not give pressure or temperature numbers or PDF certificates, so request them from the seller or manufacturer.

Verdict

On paper and in the owner feedback the Shark Industrial PEX icemaker connector is a practical, purpose-built part: listed as PEX tubing with 1/4" compression fittings, described as "burst proof," and shown in the product copy to comply with ASME A112.18.6-2017/CSA B125.6-17 and NSF/ANSI 61,372. Owner summaries provided in the research notes reinforce the listing claims with repeated "perfect fit" and "works great" comments for typical icemaker and inline-filter hookups.

That combination of manufacturer claims plus short-form owner confirmation is a solid signal for a routine icemaker hookup — but the listing inconsistency around tubing length is the single practical gotcha that could turn an otherwise easy job into a longer one. Always confirm the listing's current length and double-check that your appliance actually uses 1/4" compression fittings.

Check before you buy

• Confirm the tubing length on the product page — the title lists 25FT while the product copy mentions 8FT (listing conflict).
• Verify your appliance uses 1/4" compression fittings; the connector is listed as 1/4" comp x 1/4" comp.
• Note Unit Count: 1 and Included Components: No — the package is listed as a single hose without extra adapters.
• Review the standards the listing names (ASME A112.18.6-2017/CSA B125.6-17; NSF/ANSI 61,372) and request manufacturer documentation if you require certificates or numeric ratings.
• Inspect the current product images and seller page for installation guidance, additional components, or updated specs not present in the supplied copy.

Colors and visuals

The listing's images are provided but the product copy does not specify color or finish. Available colors may include unspecified metallic tones in images, but the listing itself lists colors as unspecified. Below is the colors note pulled directly from the listing context:

• unspecified

Final take: this connector is positioned as a no-frills, standards-minded PEX icemaker hose that owners say fits and works for the common 1/4" comp hookups. Confirm the length and any additional parts you might need before you click buy.

FAQ

1. Q: What fittings does this connector use?
   A: The listing states the connector has 1/4" compression fittings on both ends (1/4" comp x 1/4" comp).
2. Q: How long is the tubing — 25 ft or 8 ft?
   A: The listing contains conflicting information: the product title references 25FT while the product copy describes "One 8FT icemaker connector." Verify the current product page to confirm the length before purchasing.
3. Q: What material is the hose made from?
   A: Material Type in the product specifications is listed as PEX tubing, and the product copy describes the PEX as strong and able to withstand high temperature and pressure (as stated in the listing).
4. Q: Does it come with extra adapters or installation hardware?
   A: The listing shows Unit Count: 1 and Included Components: No, which indicates the package is a single connector and does not list extra adapters as included.
5. Q: Is this connector safe for drinking water or code-compliant?
   A: The product bullets list compliance with ASME A112.18.6-2017/CSA B125.6-17 and NSF/ANSI 61,372. Those standards are named in the listing; if you need supporting documents or certification files, request them from the manufacturer or seller for verification.
6. Q: Will this fit my icemaker?
   A: Owners report that the connector offered a "perfect fit" when they used it with common 1/4" compression icemaker hookups. If your machine uses 1/4" comp fittings, the listing indicates this connector is designed for that size; confirm the fitting size on your appliance before buying.