Shark Industrial 12FT PEX Ice Maker Connector Review

Intro

Replacing a refrigerator water line is one of those small fixes that can make ice and water taste better and stop a countertop from becoming a disaster. The Shark Industrial 12FT PEX Tubing Ice Maker Water Connector is a purpose-built replacement hose for fridge ice makers and inline filters. The listing calls it a "premium PEX" connector with 1/4" compression fittings, compliance with plumbing standards, and a 10-year warranty. Owner feedback clusters around two clear patterns: many buyers report easy, leak-free installs and improved water taste versus older braided or rubber lines, while a small number flag sections of the hose that arrived pinched or deformed and expressed trust concerns.

What it is / first look

At a glance this is a 12-foot length of PEX tubing fitted with 1/4" compression-to-1/4" compression connections intended for icemakers. The listing states the tubing is PEX and describes it as "extremely strong and durable," with a bullet calling it "burst proof." The product is listed as complying with ASME A112.18.6-2017/CSA B125.6-17 and NSF/ANSI 61,372, and the listing also mentions a 10-year warranty.

Key listing facts you can use right away:

• Size: 12FT (listed)
• Connections: 1/4" comp x 1/4" comp (listed)
• Standards claimed: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372 (listed)
• Warranty: 10-year warranty (listed)
• Color: White (listed)
• Package dimensions and weight from the listing: 8 x 8 x 0.5 inches and 3.2 ounces

Owners have used this connector as a direct replacement for braided or rubber lines and in at least one reported case to connect an inline Culligan IC filter to a refrigerator. Image file names tied to the listing and the product color field indicate the available color is white.

In daily use

Owners’ lived experience is the most telling part of the story for this kind of replacement part. The pattern in owner feedback breaks down into mainly positive installation and performance notes, plus a single recurring quality concern that deserves attention before you finish the swap.

Use case — refrigerator ice maker replacement

Multiple owners report this PEX hose installs easily on refrigerators with the common 1/4" compression connections and that the connector eliminated metallic or chemical tasting water that they were getting from older braided or rubber lines. One owner specifically noted the refrigerator model they connected to (an LG LFXS28596S) and that the change coincided with an improved taste — they attributed the improvement mostly to the filter but called out the hose as part of the fix.

Buyers who swapped from copper and braided plastic lines described the PEX as more flexible and less prone to cracking or splitting, especially in colder conditions where metallic lines can freeze and split if not properly maintained. Another owner compared it favorably to multiple previous materials and said it "holds up well in the weather." Those comments point to PEX’s flexibility and resistance to some common failure modes that owners experienced with older lines.

Use case — connecting inline filters

At least one owner used this connector to connect a Culligan inline filter to a refrigerator and reported a leak-free installation. That buyer described cutting the PEX line and inserting each end into the filter, with molded ends on each connection; they reported no leaks after an initial observation period and an improved water quality. The listing itself emphasizes "easy fit" for common icemaker connections.

Installation notes & packaging

Owners commonly describe the connector as easy to install and note that the 1/4" compression size fits most icemakers, consistent with the listing's "easy fit" claim. The listing dimensions and light package weight (listed as 8 x 8 x 0.5 inches and 3.2 ounces) are consistent with a coiled tubing product that’s shipped for DIY replacement.

Performance & everyday reliability

The positive owner themes are straightforward: leak-free connections, improved taste when swapping from rubber or braided lines, and durable-feeling tubing that’s more flexible than copper. That pattern is repeated enough across higher-rated posts to treat it as meaningful crowd signal: buyers who install it correctly tend to report a quiet, problem-free connection.

On the other hand, a notable critical report says the hose arrived pinched in sections. The owner open-endedly described that condition as a potential failure point and said they didn’t fully trust the hose, even though they installed it. That complaint isn’t the majority view, but because compression fittings and hidden hose damage can lead to leaks, it’s a high-impact issue worth checking for on arrival.

Materials & build quality

The listing describes the tubing as PEX and claims it is "extremely strong and durable" and "burst proof." Those are manufacturer/listing claims and should be read as such; the listing also states compliance with recognized plumbing standards (ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372), which is relevant for plumbing materials and potable water applications if you rely on the listing for certification details.

Owners’ descriptions support the listing’s emphasis on strength and flexibility. Multiple buyers say the PEX is more flexible than copper or older plastic lines and that it resists splitting and cracking in conditions where copper or rubber failed. One owner reported molded ends at each connection and described brass fittings on their unit; that detail comes from the buyer’s report rather than the listing text, so treat it as owner-observed rather than a stated manufacturer spec.

The packaging size and light weight listed (8 x 8 x 0.5 inches, 3.2 ounces) fit a typical coiled PEX replacement hose and the product size is clearly listed as 12FT, which is long enough for most standard icemaker runs behind or under a refrigerator. The color is listed as white; images tied to the listing appear to show a white hose.

Safety considerations

On safety the listing provides two important items: claimed compliance with industry standards and a 10-year warranty. Specifically, the listing says the hose complies with ASME A112.18.6-2017/CSA B125.6-17 and NSF/ANSI 61,372. If you need third-party verification for codes or local plumbing inspections, the listing’s statements are the starting point — the text is explicit that the product "Comply with following standards" and lists them by name.

Owner feedback is largely reassuring with one exception. The majority of buyers report leak-free connections and durable performance. However, at least one owner received a hose that was pinched in sections and called that a potential disaster waiting to happen. Pinched or kinked hose sections can compromise a water line under pressure even if fittings are sound; treat that complaint as a high-priority pre-install inspection item for safety.

Practical safety checks grounded in the listing and owner reports:

• Confirm the connectors on your refrigerator and any inline filter are 1/4" compression before buying — the listing specifies 1/4" comp x 1/4" comp connections.
• Inspect the hose on arrival for visible pinches, kinks, or deformities before installing. Owners report at least one instance of a pinched hose that reduced confidence in the part.
• Consult the listing/manufacturer documentation for any code or inspection requirements tied to ASME/NSF claims if you need to meet local plumbing codes.
• Keep your purchase paperwork for the listed 10-year warranty in case of later failure.

Who this is for / who should skip

Short version: this is aimed at home cooks and homeowners who need a straightforward replacement water line for an ice maker or a refrigerator water connection that uses 1/4" compression fittings. It’s practical for DIYers who want a long run (12 feet) of flexible PEX instead of a stiff copper or braided line. The listing’s claims about standards compliance and a 10-year warranty make it a solid option for routine fridge hookups.

Good fit if you:

• Have a refrigerator icemaker or inline filter that uses 1/4" compression fittings — the listing specifies 1/4" comp x 1/4" comp.
• Want a 12FT length of PEX to replace a longer run or to route around obstacles — the size is listed as 12FT.
• Prefer a flexible hose over copper for easier routing and less risk of freezing-related splitting, based on owner reports that this PEX resists cracking in weather.
• Value the listing’s claimed standards compliance and the offered 10-year warranty.

Skip or rethink if you:

• Have non-standard fittings — the listing only lists 1/4" compression connectors, so different fittings will need adapters or a different part.
• Are unwilling to inspect the hose on arrival — one owner reported a pinched hose and advised caution; that’s a reason to check the part before installing.
• Require explicit manufacturer wording about the materials used in the fittings or want certified material statements beyond the listed standard compliance — the listing’s material claims are limited to PEX and compliance statements.

Verdict

The Shark Industrial 12FT PEX Tubing Ice Maker Water Connector is a straightforward, no-frills replacement hose that the listing pitches as premium PEX, compliant with recognized plumbing standards, and backed by a 10-year warranty. Owner feedback forms a clear majority signal: buyers who correctly matched the 1/4" compression fittings and inspected the hose on arrival report easy installs, leak-free operation, and improved taste when replacing older rubber or braided lines. Those are meaningful pluses for an icemaker supply line.

There is one cautionary thread in owner feedback you should not ignore: a reported instance of the hose arriving pinched in sections. While it’s not the dominant voice in reviews, damaged tubing can lead to leaks and undermines trust in the part. The practical takeaway is simple: inspect the hose for pinches or kinks before you install it, and keep the packaging and warranty information handy.

Check before you buy (quick checklist)

• Confirm fittings: The listing lists 1/4" comp x 1/4" comp connections — verify your fridge/filter uses the same size.
• Measure run length: The product is 12FT (listed). Measure the route to be sure you have enough length and no tight bends.
• Inspect on arrival: Look for pinched, kinked, or deformed sections; one owner reported a pinched hose on delivery.
• Verify standards & warranty: The listing claims compliance with ASME A112.18.6-2017/CSA B125.6-17 and NSF/ANSI 61,372 and offers a 10-year warranty — save documentation if those items matter for local code or peace of mind.
• Color: Listed color is White — useful if visibility behind or under your fridge matters.

Overall, if you need a 12-foot replacement line and your appliance uses 1/4" compression fittings, this Shark Industrial PEX connector is a practical, well-supported option by owner reports — provided you inspect it on arrival and keep the warranty paperwork in case anything develops later.

Quick product facts (from the listing)

• Product: 12FT PEX Tubing Icemaker Connector with 1/4" comp x 1/4" comp fitting (listed)
• Material claim: PEX tubing described as "extremely strong and durable" and "burst proof" (listed claims)
• Standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372 (listed)
• Warranty: 10-year warranty (listed)
• Color: White (listed)
• Size: 12FT (listed)
• Package dimensions / weight: 8 x 8 x 0.5 inches, 3.2 ounces (listed)