Refrigerator Temperature Sensor DA32-10105X Review

Intro

Small electronic parts keep modern refrigerators running smoothly, and temperature sensors are among the most invisible yet important pieces. The Results International DA32-10105X is sold as a set of two replacement temperature sensors that "sense the temperature inside the refrigerator and send information to the electronic control," according to the listing. If your fridge is cycling oddly or showing temperature errors, a direct replacement sensor like this is a common troubleshooting target — but matching the right sensor to your model and understanding what the part actually is before you buy are essential.

What it is / first look

The DA32-10105X is a compact internal-mount refrigerator temperature sensor offered as a set of two. The listing identifies the model as DA32-10105X(2) (part number RI105Xx2), and specifies that the item is intended to communicate with the electronic control board via a push-pull output. The package includes two temperature sensors, and the listing gives a measurement accuracy of ±1.5% and an upper temperature rating of 140 °F. Item dimensions are listed as 2 x 0.05 x 0.05 inches.

Those are the concrete facts from the listing: it is an internal mount sensor designed to send temperature information to the refrigerator’s electronic control. The manufacturer and brand on the listing are Results International, and the product is presented as a straightforward replacement part rather than a universal diagnostic tool or a smart add-on.

What the listing explicitly says

• Included components: two temperature sensors.
• Mounting type: internal mount.
• Output type: push-pull.
• Measurement accuracy: ±1.5%.
• Upper temperature rating: 140 °F.
• Item dimensions: 2 x 0.05 x 0.05 inches.
• Described function: senses refrigerator temperature and sends information to the electronic control.

In daily use

Because the listing is focused and short, there’s no step-by-step install guide or compatibility chart in the product facts. That leaves a few practical observations and questions every buyer should consider before putting these in a fridge.

Replacement for a failing sensor

The DA32-10105X is sold as a replacement temperature sensor (set of two) that communicates with the control board. If a refrigerator is returning an error code tied to the temperature sensor, showing fluctuating temps, or failing to maintain setpoints, an appropriate replacement sensor can be the part that restores normal operation. The listing states the sensor "senses the temperature inside the refrigerator and sends information to the electronic control," so its intended role is clear.

Routine use and visibility

Most users won’t interact with the sensor during daily fridge use—the component sits inside the appliance and relays readings to the control board. Because the listing specifies internal mounting, the sensors are intended to be installed inside the refrigerated cavity or the appliance interior where the original sensor was located.

Pairing and redundancy

Some refrigerators use multiple sensors to monitor different zones (fresh food, freezer, ice maker) or to provide redundancy; the listing offers two sensors in one package. The presence of two sensors in the set can be convenient if your model uses more than one or if you want a spare on hand when doing a repair, but the listing does not state which specific refrigerator models the sensors fit.

Installation expectations

The product facts specify an internal mount and a push-pull output type. Beyond that, the listing does not provide wiring diagrams, connector types, or step-by-step installation instructions. For many modern refrigerators, replacing a sensor requires gaining access to the original sensor location, unplugging or removing the sensor, and installing the new part in the same physical and electrical configuration; whether that is an easy homeowner job or a technician job depends on the model and on access, which the listing doesn’t address.

Materials & build quality

The listing provides numeric performance details (accuracy ±1.5%, upper temperature 140 °F) and mechanical size (2 x 0.05 x 0.05 inches), but it does not describe the materials used, the housing finish, or the connector style. The listing also doesn’t claim any certifications or list construction materials. That absence is important when you’re buying an internal component that lives near food compartments—if you need specific materials, coatings, or certifications, the listing does not supply that information and you should verify with the seller or manufacturer before purchase.

What the facts let you evaluate

• Accuracy: ±1.5% is a concrete measurement listed by the manufacturer; it sets an expectation for how close the sensor’s readings should be to true temperature within the part’s operating range.
• Temperature limit: the upper rated temperature is 140 °F, which is stated on the listing. That gives a ceiling for the sensor’s intended environment, though typical refrigerator interiors operate well below that temperature.
• Size: the listed dimensions are compact (2 x 0.05 x 0.05 inches), which indicates a slim form factor suitable for internal placement in many refrigerators, though the listing does not show shape, mounting plugs, or fasteners.

Because material and connector details are absent, plan to double-check the part number and physical connector style against the original sensor before ordering if a direct swap is required.

Safety considerations

Kitchen safety and appliance safety are central to any repair decision. The listing provides a small but useful set of facts to inform safety thinking: the sensor is for internal mount use and has a listed upper temperature rating of 140 °F. It also communicates with the electronic control board via a push-pull output. Beyond those facts, the listing does not state insulation materials, voltage ratings, UL listing, or food-contact certifications.

Top safety reminders based on the listing

• Respect the internal-mount designation. The listing says "Mounting Type: Internal Mount"—install the sensor where the original internal sensor was placed and avoid mounting it in a way that exposes wiring or components to moisture, condensation, or direct food contact beyond the original design.
• Keep within the stated temperature limit. The listed upper rating is 140 °F; do not subject the part to sustained temperatures above what the listing specifies. Typical refrigerator temperatures are far lower, but if you are troubleshooting in environments where the appliance is off or being dried with heat, be mindful of the rated ceiling.
• Note the output type when matching electronics. The listing specifies "Output Type: Push-Pull." Confirm the replacement sensor’s output method matches the control board’s expected input before installing; mismatched outputs can lead to incorrect readings or electrical issues.
• Check for missing certifications or material statements. The listing does not specify materials or third-party safety/quality certifications. If you need parts with verified food-contact materials or particular electrical approvals, the listing doesn’t provide that documentation and you should verify with the manufacturer or product documentation.

Electrical and installation caution

The listing does not list wire colors, connector types, or voltage ratings. Because the sensor links directly to the electronic control board, turn off power at the appliance or breaker and follow manufacturer instructions when replacing sensors. If you are not confident in the wiring or access, have a qualified technician perform the replacement — the listing does not provide installation guidance or safety-specific warnings.

Who this is for / who should skip

This section is about fit and intent. The listing positions the DA32-10105X as a replacement internal temperature sensor in a set of two. That suggests a few clear buyer profiles and some people who should pause before buying.

Good fit

• Homeowners or technicians replacing an internal temperature sensor where the original part number or physical form factor matches DA32-10105X. The listing gives a specific model identifier and part number, so if you have a matching part number, this is likely the intended replacement.
• Shoppers who want a spare sensor on hand. The listing bundles two sensors, which can be convenient if your refrigerator uses more than one sensor or if you prefer a spare for future repairs.
• Buyers comfortable confirming electrical compatibility. The listing provides output type (push-pull) and mounting type (internal), which are key electrical and mechanical traits that help you check compatibility before ordering.

Who should skip or double-check

• Anyone who needs material or certification details (for example, if you require explicit food-contact certification for an internal part). The listing does not provide construction materials or third-party certifications.
• Shoppers who cannot confirm connector style or wiring. The listing doesn’t show connector types or wiring diagrams, and the dimensions are limited to a small set. If you cannot match the physical and electrical interfaces to your fridge, don’t assume compatibility.
• Buyers who need broad compatibility guarantees. The listing does not include an explicit compatibility list of refrigerator brands or models, so this part is best when you can confirm the model number or connector match.

Verdict

Concrete listing facts make this a straightforward, no-frills replacement sensor: two sensors in the package, internal-mount design, push-pull output, ±1.5% measurement accuracy, and a 140 °F upper rating. For buyers who can match the DA32-10105X part number or confirm the sensor’s electrical and mechanical interfaces with their original part, this listing provides the basic specs you need to make an informed replacement purchase.

Where the listing is deliberately limited is in materials, connector visuals, and compatibility charts. Those omissions matter when you are swapping parts. The absence of material statements and certification claims means you should verify those details if they are important to you, and the lack of wiring and connector specifics means this is best suited to people who can confirm fit or who will have a technician do the swap.

Pros

• Sold as a two-pack — useful for models that use multiple sensors or for keeping a spare.
• Measurement accuracy (±1.5%) and an upper temperature rating (140 °F) are explicitly listed, offering concrete performance expectations.
• Compact listed dimensions suggest a slim sensor appropriate for internal installation.

Cons / limitations

• The listing does not specify connector type, wiring, or provide installation instructions — those are important for confirming a direct swap.
• No material or certification details are provided in the product facts; verify those if you need them.
• Compatibility by brand or fridge model is not listed; buyers must confirm the DA32-10105X is the correct part for their appliance.

Check before you buy (short checklist)

• Confirm the DA32-10105X or part number RI105Xx2 matches your fridge’s replacement part number.
• Verify the original sensor’s mounting location is internal — the listing specifies "Internal Mount."
• Match the electrical interface: the listing shows a push-pull output — confirm your control board expects that output type.
• Confirm the physical form factor and connectors match your original sensor; the listing gives compact dimensions but not connector visuals.
• If you require material or certification details, contact the manufacturer or seller — the listing doesn’t specify materials or certifications.
• Plan for safe replacement: switch off power to the appliance and follow manufacturer instructions or have a qualified technician install the part if you’re unsure.

Frequently asked questions

The FAQ below draws only from the product facts in the listing and highlights what is and isn’t specified about the DA32-10105X.

Does the DA32-10105X come as a single sensor or in a pack?

The listing states the item includes a set of two temperature sensors; included components are listed as "(2) Temperature Sensors."

What is the listed measurement accuracy?

The listing specifies a measurement accuracy of ±1.5%.

Where is this sensor mounted?

The product facts list the mounting type as "Internal Mount," so the sensor is intended to be installed inside the appliance.

What is the output type of the sensor?

The listing identifies the output type as "Push-Pull," which is the electrical interface described by the manufacturer in the product facts.

What temperature range can the sensor tolerate?

The listing provides an upper temperature rating of 140 °F. The listing does not specify a lower temperature rating or a full operating range beyond that upper rating.

Does the listing say which refrigerator models the sensor fits?

The listing does not provide a compatibility list of refrigerator brands or models; it gives the model number (DA32-10105X(2)) and part number (RI105Xx2) but does not state specific appliance compatibility.

What are the physical dimensions of the sensor?

The item dimensions are listed as 2 x 0.05 x 0.05 inches in the product facts.

Does the listing describe the materials or certifications for food-contact safety?

The product facts do not specify construction materials or any third-party certifications; the listing does not provide material or certification details.

Final notes

If you are ordering the DA32-10105X as a direct parts replacement, the listing gives the essential electrical and performance facts you’ll need to start confirming compatibility: internal mount, push-pull output, ±1.5% accuracy, and a 140 °F upper rating. Because connector type, material composition, and a model-compatibility list are not included in the listing, plan to verify those details against your refrigerator’s existing sensor or documentation before you buy. Keep the check-before-you-buy checklist handy, and if you’re unsure about the wiring or installation steps, consider scheduling a qualified technician to do the swap.

Colors available (inferred from images):

• available colors may include standard gray or black (listing doesn't specify)