PROSOCOOL Ice Maker Bushing Review — GE Opal 2.0 Fit

Intro

This is a practical look at the PROSOCOOL Ice Maker Bushing replacement for GE Opal 2.0 countertop ice makers. The listing positions this as a direct-fit auger bushing for 9-hole ice makers and describes the part as a POM plastic piece meant to reduce wear, noise, and improve efficiency. Owner feedback is small but consistent: people say the part is easy to install and that their machines stop making loud screeching/grinding noises after the swap. If you have a GE Opal 2.0 that's started to howl or squeal during auger rotation, this is the straightforward replacement most buyers are reaching for.

What it is / first look

What you get in the box is simple: the listing lists the included component as one Ice Maker Bushing. The product dimensions are given as 3.5 x 2.3 x 0.9 inches and the item weight is 0.634 ounces, so this is a very small, lightweight part meant to sit inside the ice-maker extruder/auger assembly.

Brand and model facts: the part is offered by PROSOCOOL, marketed specifically as a countertop ice maker bushing replacement for the GE Opal 2.0 ice maker and listed as fitting 9-hole ice makers. The listing gives a model number of "Coutertop Ice Maker Bushing" and lists the part number as "Ice Nugget Maker Bushing." The listing also states the material as POM plastic and includes language about the material’s mechanical properties (high tensile strength, good wear resistance, low coefficient of friction) — those phrases are taken directly from the product copy on the listing.

On imagery: image file names associated with the listing suggest a dark-colored part. The product title itself includes the words "Black Sludge," so available colors may include black; owners and the listing material do not present multiple colorways.

In daily use

Because this is a single replacement part for a countertop ice maker, "daily use" in practical terms means: install it correctly, reassemble the extruder, and let the machine run. The listing includes a short install outline and owners repeatedly flag straightforward installation and improved noise performance.

For GE Opal 2.0 owners

The listing explicitly states compatibility with the GE Opal 2.0 and with 9-hole ice maker designs. If your Opal 2.0 has developed a screeching or grinding noise from the auger area, the title and the owner feedback both point to this bushing as a targeted fix. Owners' repeated comment — paraphrased as "No whales!" in the research notes — indicates they noticed a clear drop in the loud mechanical noise after installation.

For home users who want a simple repair

The listing’s install notes are brief but actionable: make sure power is off, remove the whole extruder, take out the old auger, clean the interior, coat the liner with a layer of grease, fit the new bushing, and reinstall the extruder. Owners report that installation is easy, which aligns with the listing’s emphasis on a simple swap. Because the part is small and light (0.634 ounces), handling is straightforward for someone comfortable taking the extruder out of a countertop unit.

For people troubleshooting noise or increased wear

The product description states that the auger bushing is used to reduce wear, decrease noise, and increase efficiency. Those are the outcomes the manufacturer positions the part to deliver. The owner feedback about reduced screeching supports the noise-reduction claim in practice, at least anecdotally for the small group who left feedback.

Materials & build quality

The listing describes the bushing as made of "high-quality POM plastic material," and specifically lists "high tensile strength, good wear resistance and low coefficient of friction" as the material attributes. Treat those as manufacturer/listing claims — the product copy makes those mechanical-property statements directly.

Given the small size and the part’s function as an inner liner for the auger, POM (polyoxymethylene) is a material commonly used for wear parts in rotating assemblies; the listing’s copy references the material advantages you’d want for an auger bushing. The listing doesn’t provide independent test data, certifications, or material grades, so if you need third-party verification for a critical application, you should verify the current listing/manufacturer documentation.

Build-feel in owner reports: owners report the piece installs cleanly and that it removes the screeching. There are no owner-reported failures or breakages in the available research notes, and the listing highlights the part as a direct-fit replacement for the Opal 2.0 9-hole extruder. The finished piece, from photos and the weight/dimension listing, appears compact and intended as a functional maintenance item rather than a long cosmetic component — that is, it’s meant to sit inside an assembly where fit, friction, and longevity matter more than looks.

Safety considerations

Manufacturer instructions and the listing explicitly note safety-adjacent steps: "Make sure ice maker power is off" before you remove the extruder. That instruction is in the product bullet points and should be followed; the listing uses this step as the very first point in the installation outline.

Installation guidance from the listing also recommends cleaning the inner extruder and coating the liner with a layer of grease before inserting the new bushing. Those are the recommended assembly steps on the listing and help the part seat and function as intended.

Other safety notes: the listing does not provide electrical specifications, certification statements, or a warranty length beyond the label "Warranty Description: other." Because this is a small mechanical replacement inside an appliance, follow the listing and the appliance manufacturer’s instructions when handling electrical connections and reassembling the ice maker. If you’re not comfortable disassembling the extruder or working inside an electrical appliance, the listing’s own instruction to power the unit off is an indicator to seek help or consult the ice maker manual.

Who this is for / who should skip

Buy this if:

• You own a GE Opal 2.0 (listing compatibility) and your unit has a 9-hole auger. The listing specifically calls out GE Opal 2.0 compatibility and fitting 9-hole ice makers.
• Your Opal 2.0 or similar countertop nugget-ice maker is making screeching, grinding, or loud auger noise. The listing title positions the part as a fix for screeching/grinding and owners report quieter operation after installing it.
• You want a straightforward, budget-conscious replacement part you can swap yourself. The listing describes an easy-install process and owners echo that installation is easy.

Skip this if:

• Your ice maker isn’t a GE Opal 2.0 or you don’t have the 9-hole auger configuration — the listing only specifies compatibility with that model/format.
• You require documented third-party material certification or a detailed warranty. The listing gives the material as POM and lists "Warranty Description: other," but does not provide independent verification or a clear warranty length in the product text.
• You are uncomfortable disassembling the ice maker extruder. The listing’s instructions require removing the whole extruder and handling internal components; if that’s outside your comfort zone, consider professional service.

Verdict

Short version: the PROSOCOOL Ice Maker Bushing is a small, focused replacement part listed specifically for GE Opal 2.0 9-hole countertop ice makers. The listing calls the part POM plastic with good wear and low friction, and the limited owner feedback available emphasizes two consistent points: it’s easy to install and it effectively reduces screeching/grinding noise. If compatibility checks out and you’re comfortable following the listed install steps (power off, remove extruder, clean, grease liner, fit new bushing), this is a tidy, budget-oriented fix for auger noise and wear.

Check before you buy

• Confirm compatibility: the listing specifies this is for GE Opal 2.0 and fits 9-hole ice makers — verify your unit matches.
• Confirm included component: the listing lists one Ice Maker Bushing as the included component; ensure you’re ordering the replacement piece you need.
• Follow install steps from the listing: power off the ice maker, remove the extruder, remove the old auger, clean the interior, coat the liner with grease, fit the new bushing, and reinstall.
• Note the material claim: the listing describes the part as made of POM plastic with high tensile strength, good wear resistance and a low coefficient of friction — consult the current manufacturer/listing documentation if you need material-grade verification.
• Warranty check: the listing shows "Warranty Description: other" but does not specify a length or details; verify current warranty information on the manufacturer/listing page if that matters to you.

Bottom line: this is a purpose-built replacement part with direct-fit claims for a common countertop nugget-ice maker. Owners who bought it reported the noise problem being resolved and found installation straightforward. The listing supplies the necessary dimensions (3.5 x 2.3 x 0.9 inches), weight (0.634 ounces), and explicit install outline — use those details when matching parts and planning the repair.

Colors

• Available colors may include: black