PIAOLGYI Ice Scoop Holder review

Intro

This is a focused, no-nonsense review of the PIAOLGYI Ice Scoop Holder built for the Frigidaire EFIC117-SS 26 Pound countertop ice maker. If you own a compact ice maker and have been juggling a loose scoop (on the counter, in a cup, or on the floor), this tiny accessory promises a dedicated place to hang that scoop. The listing describes it as a plastic holder compatible with the Frigidaire model and calls the material "high quality and safe plastic." Owner feedback highlights the usefulness of having a fixed spot for the scoop, but also flags attachment failures and return frustrations. Below I walk through what it is, how it behaves in daily use, build and safety considerations, and who should buy it — plus a short checklist of things to verify before you click "buy."

What it is / first look

At heart the PIAOLGYI Ice Scoop Holder is exactly what the name says: a small plastic clip designed to hold an ice scoop on the side of a compatible countertop ice maker. The listing states it is made for the Frigidaire EFIC117-SS 26 Pound ice maker and the package includes the holder only (the scoop is not included). The manufacturer/brand listed is PIAOLGYI and the model number is BSJ-02. The product color shown in the specification is Black, and the available options include black and white.

Out of the box you get a single plastic holder. The listing copy emphasizes a simple installation — "you can attach to the side of your ice maker to hold it" — and also notes the package does not include a scoop. The listing additionally claims a 30-day unconditional money-back guarantee from PIAOLGYI; owners’ experiences with returns are mixed (see the Safety & returns notes below).

In daily use

What this holder does is straightforward: keep the scoop off counters and within arm’s reach of the ice maker. Owners repeatedly report satisfaction with that core function. Typical owner comments include "perfect place for my ice scoop," "fits the scoop perfectly," and "great little scoop holder." That’s the repeated, reliable pattern in buyer feedback: when the holder stays attached, it solves the everyday nuisance of a loose scoop.

For countertop ice makers

Owners who paired this holder with the Frigidaire EFIC117-SS or similar countertop units say it makes the setup look neater and keeps the scoop handy. Several reviews explicitly call it an ideal accessory for their portable or countertop ice makers, including users who bought the holder specifically because the ice maker itself had no built-in scoop storage.

For campers, RVs, and small kitchens

One recurrent owner theme is mobile or space-challenged setups. Reviewers using compact ice makers in campers or small kitchens appreciated not having the scoop fall on floors or counters. Having the scoop secured to the machine reduces clutter and the risk of it getting knocked into food-prep areas — a useful convenience in tight spaces.

When it fails to stick

Owner feedback shows a clear single-mode failure: the holder falling off the ice maker after a few days. Multiple buyers say the holder worked fine for a short time, then detached. A few tried stronger adhesives (super glue, extra tape) but reported mixed results. That failure mode turns an otherwise handy accessory into a nuisance: once detached, the holder occasionally falls on the floor or disappears, and owners note that the maker's aesthetic can suffer if the holder is loose.

Materials & build quality

The listing describes the material as "high quality and safe plastic." That phrasing is presented as a listing/manufacturer claim rather than an independently verified material certification. The product facts list the material type simply as "Plastic." The package contents are limited: the listing and specifications both indicate the scoop is not included, and you receive the holder only.

Physically, owners call the piece a "rigid piece of plastic." Comments praising the fit use words like "perfect fit" and "installation was a breeze," suggesting the molded dimensions match the common scoop profile for the advertised Frigidaire model. The simplicity of the part means there are few mechanical components to break (no hinges, no moving parts), which supports a baseline expectation of reliable basic structural durability if the plastic itself is intact and the attachment is secure.

That said, build quality in everyday use is only as good as the attachment method. Owners report that the adhesive supplied in the packaging does not always hold long-term. One buyer explicitly said they had to add their own sticky tape after the included tape failed. Another tried glue and aftermarket adhesive solutions with mixed success. So while the molded plastic itself appears serviceable to owners, the weak link for longevity is the mounting adhesive rather than the clip’s geometry or plastic thickness (owners do not commonly report cracking or breakage of the plastic piece itself).

Safety considerations

There are no listing claims of third-party safety certifications in the product data. The listing's language calls the material "safe plastic," but that should be read as the manufacturer's description. If you need explicit food-contact or certification information, the listing doesn't specify any standards or independent testing; verify current manufacturer documentation if that matters to you.

From a kitchen-safety standpoint, the primary concerns raised by owners are:

• Attachment failure: when the holder falls off, the scoop can drop to the floor — owners describe that happening. In food-prep areas, dropped scoops are unsanitary until cleaned, so the convenience of the holder only improves safety if the holder stays attached reliably.
• Return and replacement friction: one strongly worded owner report states that the seller would not accept returns, even though the listing claims a 30-day unconditional money-back guarantee. That discrepancy is important if the holder fails soon after installation and you expect an easy return or refund.

There are no owner reports of sharp edges, breakage creating cut hazards, or material chipping that would directly present a mechanical risk. The holder itself is a passive accessory with low electrical or thermal hazard: it doesn’t plug in or heat up. The safety conversation therefore centers on hygiene when adhesive failure leads to the scoop dropping and on reliable return policies if the part proves defective.

Who this is for / who should skip

Buy this if you:

• Own a Frigidaire EFIC117-SS 26 Pound countertop ice maker (the listing specifically notes compatibility) and want a neat place to store the scoop.
• Run a compact or mobile kitchen (RV, camper, dorm, or small apartment) and want the scoop off counters and within reach.
• Prefer a minimal, low-cost solution to scoop storage and don’t mind reinforcing the adhesive if necessary.

Skip this if you:

• Need a guaranteed, long-term adhesive solution out of the box. Owners frequently report the supplied adhesive failing, and some buyers needed to add their own tape or glue to keep the holder fixed.
• Want the scoop included with the accessory — the listing is explicit that the scoop is not included, but several buyers initially assumed it was because photos often show the scoop mounted in the holder.
• Require documented material certifications (e.g., specific food-contact approvals). The listing describes the plastic as "safe" but does not state any certification; the listing doesn't specify independent testing or standards.

Verdict

In short: the PIAOLGYI Ice Scoop Holder does the basic job it’s made for — giving your ice scoop a place to live on the side of a compatible Frigidaire countertop ice maker. Owners consistently praise the convenience and fit when the holder stays in place. The most common complaint is the mounting adhesive, which some owners say fails after a few days and leaves the holder detached. Another practical issue to be aware of: the listing states the scoop is not included, but pictures often show the holder with a scoop, and at least one buyer was surprised by that omission and frustrated by return handling.

If you want a cheap, simple accessory to tidy up your ice-maker station and don’t rely on the included adhesive to last for months without reinforcement, this is a reasonable buy. If you need an out-of-the-box, long-term adhesive guarantee, or want the scoop bundled, this doesn't fully solve those needs without additional materials or follow-up.

Check before you buy

• Confirm compatibility: the listing specifies the holder is for the Frigidaire EFIC117-SS 26 Pound model.
• Note the scoop is not included: package contains the holder only.
• Expect to reinforce the adhesive: owners commonly report the included tape can fail and that aftermarket adhesive or tape was required to keep it attached long-term.
• Review the listing's return policy and the seller’s reputation: the listing claims a 30-day unconditional money-back guarantee but at least one owner reported problems getting a return accepted.
• Decide if manufacturer claims about the material ("high quality and safe plastic") meet your needs — the listing does not specify independent certification.

Available colors (from the listing and images):

• Black
• White

FAQ

The listing clearly states the scoop is NOT included; the package includes only the ice scoop holder for the Frigidaire EFIC117-SS 26 Pound Ice Maker.

The product is described as compatible with the Frigidaire EFIC117-SS 26 Pound countertop ice maker. The listing repeatedly ties the holder to that model.

The specification lists the material type as "Plastic," and the listing describes it as "high quality and safe plastic." That phrasing comes from the manufacturer/listing rather than an independent laboratory certification; the listing doesn't specify any certification standards.

The listing says the holder "can be easily installed" and that you can attach it to the side of your ice maker. Owner feedback indicates the package includes some adhesive tape, but several owners report the supplied tape did not hold and needed replacement or reinforcement with their own adhesive.

The listing claims PIAOLGYI provides a 30-day unconditional money-back guarantee. However, at least one owner reports being unable to return the part and notes a lack of return acceptance from the seller. If a seller return policy matters to you, verify the current listing and seller return instructions before purchase.

Owner experiences are mixed. Several buyers report the holder worked fine and stayed put; multiple others report it fell off after a few days and that aftermarket adhesive or tape was required. The common pattern in owner feedback is that the mounting method is the most likely failure point.