Opal 2.0 Side Tank Clip (Generic) — Replacement Part Review

Intro

Small parts matter. The Generic Tank clip 2.0 (part number getc20) is a single-piece, plastic replacement clip that the listing describes as specifically designed to connect the side water tank to GE Profile Opal 2.0 nugget ice makers. At about 3.41" deep, 1.6" wide, and 1" high and sold as a one-count included component, this tiny part is the mechanical link that keeps a removable side tank mounted and aligned. Owners who bought it as a repair part repeatedly note that it secures the tank and can be a cheap way to restore a working machine — but others ran into fit problems, especially with larger tank variants.

What it is / first look

The listing calls this item "Opal 2.0 Ice Maker Side Tank Replacement Clip" and packages it as a one piece, gray, plastic clip that connects the side tank to the ice machine. The product is branded Generic, manufactured by generic, and identified as Model Name Tank clip 2.0 with Part Number getc20. The listing lists the item dimensions as 3.41"D x 1.6"W x 1"H and capacity as 1 cubic inches; Material Type is listed as Plastic. Included components: side water tank clip; Unit Count: 1 Count.

Out of the box you should expect a single, gray plastic clip shaped to mate with the Opal 2.0 side tank and the corresponding receiver on the ice maker. The listing makes a point of compatibility: it is described as compatible with GE Profile Opal 2.0 nugget ice makers and explicitly not compatible with Opal 1.0 ice makers.

In daily use

Because this is a functional spare part rather than a consumer-facing appliance, "daily use" is really "what happens when you reattach a detached or damaged clip." Owners who report success describe a quick swap: remove the old/failed clip, seat the replacement in the same snap-fit points, and the side tank is again held firmly in place. A number of buyers say the clip "almost locks it in place" and that it restores the tank to a near-original fit at a much lower cost than OEM alternatives.

For standard Opal 2.0 owners

Owners with standard Opal 2.0 side tanks repeatedly report that the clip fits well and functions like the original part. If your ice maker is the Opal 2.0 model and you have the standard side tank (not an XL size), the listing and buyer feedback indicate this part is likely to restore a secure connection without additional hardware.

If you have the XL side tank or a nonstandard setup

Buyer feedback contains a clearly repeated signal: this clip is not universally sized. Multiple owners say it is NOT compatible with the XL side tank and that they had to return it because it didn’t fit their larger tank. One mixed review explicitly warns that the clip may be compatible with the standard Opal 2.0 side tank but not with the XL side tank, and that the listing did not make this distinction obvious. If you own an XL side tank or any third-party tank variant, expect to verify measurements before purchasing.

Fit and installation notes

The listing doesn’t supply a full installation guide; owners report the clip is a single-piece snap-fit replacement. Positive feedback calls out that it's "just as good as the original" and secures the side tank effectively when it fits. Critical feedback centers on mismatched sizing: "does not fit" appears in a minority of reviews. That pattern suggests the clipping geometry is correct for standard Opal 2.0 tanks but that there are size variants in the field that this particular Generic clip does not accommodate.

Materials & build quality

The listing lists Material Type as Plastic and identifies the product color as gray. Beyond that, the listing does not provide the exact polymer type, any reinforcement details, or test claims. Owners who liked the part describe the perceived quality and packaging as good and say the clip feels equivalent to the original in fit and finish.

Because the manufacturer and listing information are limited to "plastic," here are the concrete, listing-backed details you can rely on:

• Brand: Generic; Manufacturer: generic.
• Model Name: Tank clip 2.0; Part Number: getc20.
• Material Type: Plastic (no further polymer or food-contact claims are specified).
• Item dimensions: 3.41"D x 1.6"W x 1"H; Capacity listed as 1 cubic inches.
• Included Components: side water tank clip; Unit Count: 1.

Owners reporting a successful replacement say the clip "almost locks" the tank in place and that it "works as it should". A recurring positive theme is that this part provides a low-cost match for the original. However, because the listing doesn't specify material properties, tensile strength, UV resistance, or how the plastic behaves near the machine over time, you should interpret "works like original" as buyer perception rather than an engineered guarantee.

Safety considerations

When small mechanical parts fail on appliances the usual hazards are instability, leaks, or sudden detachment. The listing itself does not provide safety certifications or hazard warnings; the only safety-relevant facts in the product data are its role (a side tank connecting clip) and its material (plastic).

Owner feedback is the most useful safety signal available:

• Positive reviews say the clip secures the side tank effectively — that implies a secure connection when the part fits.
• Critical reviews relate to fit issues — a clip that "does not fit" or is sized improperly may leave the tank less secure. Several buyers warn that this clip is not compatible with the XL side tank.

Given those facts, the practical safety guidance is straightforward: verify compatibility before installing. An improperly seated clip could leave the tank unsecured; the listing doesn't describe any engineered fail-safes or secondary locks, so the mechanical snap-fit is the only retention method listed. Follow manufacturer instructions for seating, and confirm the replacement clip engages fully and holds the tank snugly before leaving the machine unattended. Because the listing does not specify the plastic type or any food-contact certification, consult the current listing/manufacturer documentation for any material claims you care about.

Who this is for / who should skip

Good fit: This product is aimed at Opal 2.0 nugget ice maker owners who need a low-cost replacement of the side water tank clip. The listing explicitly states it is designed for GE Profile Opal 2.0 nugget ice makers and not compatible with Opal 1.0 models. Owners who have the standard Opal 2.0 side tank and who report success say the clip restores a secure attachment and matches the original's fit.

Buy if

• You have a standard Opal 2.0 side tank and your original clip is lost, broken, or loose — owners report it behaves like the original when sized correctly.
• You want an inexpensive, single-part replacement rather than a full OEM assembly — the listing's Unit Count is 1 Count and the included component is the side water tank clip.

Skip or verify first if

• You have an XL side tank or an aftermarket tank variant — buyer feedback explicitly notes incompatibility with the XL side tank.
• You need material certifications (the listing only lists "Plastic" for Material Type and does not provide polymer specifics or food-contact certifications).

Verdict

At its core this is a small, simple spare part: the Generic Tank clip 2.0 (getc20) is a one-piece, gray plastic connector that the listing states is specifically for GE Profile Opal 2.0 nugget ice makers. Owners who matched the clip to the standard Opal 2.0 side tank report it restores a near-original fit and secures the tank in place at a fraction of the cost of larger assemblies. That favorable buyer signal — "just as good as the original" and "great for standing and securing the side tank" — is the product's primary strength.

The main weakness is fit ambiguity. The listing is explicit about Opal 2.0 vs Opal 1.0 compatibility (it states it is not compatible with Opal 1.0), but it does not call out sub-variants like the XL side tank. Multiple owners flagged the XL incompatibility explicitly, and at least one buyer returned the clip for that reason. Because the listing only specifies general "Plastic" without material-grade details, there is also no listing-backed assurance about long-term wear or the plastic's behavior around the machine.

Check before you buy

• Confirm your model is the GE Profile Opal 2.0 (the listing states compatibility with Opal 2.0 and explicitly not with Opal 1.0).
• Measure your side tank or confirm whether you have the XL side tank — owner feedback repeatedly warns this clip may not fit XL variants.
• Note the part identifiers: Model Name Tank clip 2.0, Part Number getc20, Brand: Generic.
• Verify you only need a single clip — the listing's Unit Count is 1 Count and Included Components lists the side water tank clip only.
• If you need material or safety certifications, consult the current listing/manufacturer documentation because the product lists Material Type only as "Plastic" and provides no further polymer or certification details.

Colors available: gray.