LEYEYDOJX AP1200 Ice Maker Pump Review

Intro

Small submersible circulation pumps quietly do a lot of work inside commercial and countertop ice machines. The LEYEYDOJX AP1200 is a compact, AC-powered replacement intended for a lineup of HZB-series ice makers (and used successfully—after some rigging—by other brands). This review pulls together the listing specs and owner feedback so you know what the part actually is, how it installs, what to expect in daily use, and the signals on durability.

What it is / first look

The AP1200 is listed as a submersible water pump sized for ice maker circulation. The listing gives model/AP1200 identity, declares compatibility with a long set of HZB models (HZB-30F, HZB-38F, HZB-32, HZB-45, HZB-65, HZB-90, HZB-120, HZB-160) and describes this unit as a replacement for the original pump in those machines.

Key listed specs you’ll want at hand:

• Voltage: AC 120 volts (listed).
• Rated current: 0.13A at 60Hz (listed).
• Flow rate: Qmax 600 liters per hour (listed).
• Maximum lifting height (Hmax): 0.8 meters (listed).
• Size: listed both as 1.85" x 1.81" x 2.36" (inches) and 47 x 46 x 60 mm (listing copy contains both).
• Water outlet diameter: 15.5 mm (listed).
• Material type: plastic; the listing also describes the pump head as being made of "high-quality food-grade materials" (manufacturer claim).
• Package: one piece new water pump included (listed).
• Warranty: 24 months (listed under manufacturer warranty description and repeated in the bullet features).

Images and the product color field list the pump as black. Owners point out that plug color has varied in shipments (examples include a red plug shown in the listing image and at least one buyer receiving a white plug).

In daily use

The AP1200 is presented by the listing as a centrifugal, self-priming submersible pump designed for stable operation and low noise. Owner feedback highlights two dominant patterns: it generally restores ice-maker function and is straightforward to fit in machines it was designed for, but a minority of buyers report early failures.

Commercial kitchens & bars

The listing tags the product for "commercial_kitchen" and "bar" use; the specified flow rate (600 L/h) and the stated 0.8 m maximum lift are the technical numbers commercial operators should compare to their machine’s requirements. Owners using it in commercial or heavy-use contexts report that when the pump fits the OEM slot, it brings a dead machine back to life quickly and allows time for routine cleaning during the swap. One owner explicitly mentions replacing an original pump that died within the first year and getting the new unit installed in about 30 minutes.

Countertop & home ice makers

Several owners used the AP1200 in home settings or in non-HZB brands. One buyer reported using it in a Vevor SSX65C ice maker—note they had to do some rigging and adjustments to make it fit, but the pump worked after modifications. That demonstrates two things: plug/power termination can be compatible, but physical mounting and hose fit may require creative work if your model is not exactly one of the listed HZB machines.

Installation & fit notes from owners

• Owners repeatedly say the swap is straightforward when the part matches the machine’s model number. One owner said the swap took ~30 minutes and fit the original tank slot.
• Plug appearance can vary: the listing image shows a red plug, while at least one buyer received a white plug. An owner noted the plug itself was identical and plug-and-play in their application.
• A buyer using the pump in a different brand needed minor rigging to make it fit but reported the pump worked once adapted.

On noise and performance, the listing claims "low noise" and "stable performance." Owners who successfully installed the pump generally report it restored their machine and ran quietly enough not to be a nuisance—consistent with the listing claim. However, the most critical recurring user note is that a small number of units stopped functioning after a few months: one explicit 1–2 star report said the pump stopped working after three months.

Materials & build quality

The product page lists the material type as "plastic" and states that "the pump head is made of high-quality food-grade materials." That phrasing is presented as the manufacturer's claim in the listing; it is not independent verification. The pump is described as a centrifugal, self-priming submersible style—those are design features rather than a measure of build finish, but they tell you how the unit moves water.

Dimensions are compact: the listing gives both metric (47 x 46 x 60 mm) and imperial (1.85" x 1.81" x 2.36") measurements. The water outlet diameter is specified at 15.5 mm, which is a concrete number to check against the hose on your ice machine before buying.

Packaging and items included are simple: the listing says one new water pump per package. The product's stated warranty length is 24 months—which is relatively generous for a replacement pump and a measurable commitment from the seller/manufacturer.

Owners’ impressions on build quality are mixed. Several 4–5 star notes praise the unit as a "great replacement pump" that fits and runs well. There are also reports of units failing earlier than expected, which suggests variability in quality control or that installation/operating conditions affect lifespan.

Safety considerations

From a safety perspective, there are a few fact-based items to note directly from the listing and owner feedback.

• Electrical requirements: the listing states AC 120V, 60Hz, 0.13A. That means the pump runs on mains voltage typical in North America; verify your machine’s wiring and outlet before attempting a replace.
• Maximum lift: listed as 0.8 meters. If your machine requires the pump to lift water higher than that, the pump may not be able to maintain proper circulation.
• Food-contact materials: the listing claims the pump head is made of "food-grade materials." Phrase this as a manufacturer/listing claim; the listing does not supply third-party certification details in the product copy.
• Certifications and safety listings: the listing does not specify UL, NSF, ETL, or other independent safety certifications. If you need certified parts for commercial compliance, the listing is silent on that point and you should verify current manufacturer documentation.
• Plug & wiring: owners report plug color variability (red vs. white) but also report plug compatibility in several cases. Still, check the plug type, polarity, and connector fit; make sure the machine is unplugged before you work on it.
• Noise and overheating: the listing promotes "low noise" and "stable performance." Owners largely reported quiet operation, and there are no explicit user reports of overheating or smoke in the available owner feedback. That said, a small number of owners reported early stoppage (one example: stopped working after three months), which could indicate premature electrical or motor failure in some units—worth monitoring if you install one.

Kitchen-safety reminder: always disconnect power to the ice machine before opening or replacing internal parts, follow the manufacturer’s service instructions, and verify the replacement part number and physical fit before running the machine.

Who this is for / who should skip

This section helps you decide quickly whether the AP1200 is the right replacement pump for your situation.

Who this is for

• Owners of the listed HZB models (HZB-30F, HZB-38F, HZB-32, HZB-45, HZB-65, HZB-90, HZB-120, HZB-160) who need a direct replacement—the listing is targeted at those models.
• Home or small commercial operators who need a compact 120V pump with a 600 L/h flow capacity and 0.8 m lift and who are comfortable verifying dimensions and outlet hose size (15.5 mm) before buying.
• People who want a replacement covered by a 24-month warranty as stated in the listing.
• Technically comfortable users who can do a straightforward swap or do light rigging—owner reports indicate some buyers modified mounts or hose routing to make it fit other brand machines.

Who should skip

• If your ice machine requires a pumping head higher than 0.8 m, the listing’s specified Hmax suggests this pump may be insufficient.
• If you require documented third-party safety certifications (UL/ETL/NSF) for your commercial operation—those certifications are not listed in the product description and the listing does not specify them.
• If you expect aftermarket parts to last reliably for many years without any risk of early failure; a minority of owners reported early stoppage, so if you can’t tolerate that risk you may prefer factory-authorized OEM parts or an alternative backed explicitly by field-tested longevity data.

Verdict

Short version: the LEYEYDOJX AP1200 is a compact, straightforward replacement pump for a family of HZB ice maker models and for users willing to adapt it to other brands. The listing provides clear technical numbers—AC 120V, 0.13A, 600 L/h flow, 0.8 m head, 15.5 mm outlet diameter—and a 24-month warranty, which are all useful, tangible facts to guide a purchase.

Owner feedback is the real editorial signal here: the majority of owners who posted positive notes say it "works well," fits into the designed slot, and is easy to install. That aligns with the listing’s emphasis on easy installation and low noise. However, a minority of owners report early failures (for example, one owner reporting stoppage after ~3 months). That inconsistency points to quality-control variance across units or to installation/usage factors that affect lifespan.

If you need reasonable flow for a compatible ice machine, are able to check the physical fit and outlet diameter, and appreciate a two-year warranty, the AP1200 is a budget-friendly replacement option that often restores functionality quickly. If your operation demands certified parts, guaranteed multi-year field reliability, or greater pumping head, the listing suggests you should look for a different item or verify the machine’s exact requirements before buying.

Check before you buy (quick checklist)

• Confirm your ice machine’s model number is one of the listed compatible models (HZB-30F, HZB-38F, HZB-32, HZB-45, HZB-65, HZB-90, HZB-120, HZB-160) or that you’re prepared to adapt the part to a different brand.
• Measure the pump cavity or compare dimensions: the listing shows 47 x 46 x 60 mm (also listed as 1.85" x 1.81" x 2.36").
• Check water outlet/hose diameter—listed as 15.5 mm—against your machine’s hose size or adapter availability.
• Verify your application’s required lift is at or below 0.8 m (the listing’s Hmax).
• Confirm electrical compatibility: AC 120V, 60Hz, 0.13A as listed; ensure proper wiring and that the machine is unplugged during installation.
• Be aware plug color/appearance may vary in different shipments—owners have received different plug colors but report compatible connections in many cases.
• Keep the 24-month warranty information and seller contact handy in case you experience early failure; owners reported prompt seller responses in the listing copy.

Colors available (from listing and images):

• black

Final notes

What stands out about the AP1200 is that the listing provides actionable specs—flow, head, outlet size, voltage, physical dimensions—that allow a buyer to check fit and function before purchase. Owners' real-world reports mostly back up the claim that it "works well" as a replacement, while the handful of early-failure reports temper enthusiasm and recommend keeping the warranty and part number checks top of mind.

If you buy this pump, match the model number and dimensions carefully, verify the outlet size and lift requirement, and save your order/warranty information in case you need a replacement under the 24-month coverage the listing promises.