JKLESA 9161076-01 Ice Maker Pump Motor Review

Intro

If an ice maker has stopped cycling water properly, the pump is one of the most common root causes — it moves water to the evaporator, and when it fails the machine can stop producing ice. The JKLESA 9161076-01 is a direct replacement pump motor listed for a long roster of Ice‑O‑Matic models. The listing makes straightforward claims about electrical specs, dimensions, and what it replaces, and owner feedback collected during research shows a clear pattern: buyers say it fit their machines and brought ice production back. This review breaks down what the listing actually says, what owners report, and the practical checks you should make before buying.

What it is / first look

The product is a corded electric ice maker water pump motor sold under the JKLESA brand and listed specifically as model 9161076-01. The listing describes it as a replacement pump for Ice‑O‑Matic machines and includes a compact parts set intended to transport water to the evaporator so ice cubes can form during the normal cycle.

Key listing facts at a glance:

• Brand and model: JKLESA 9161076-01 (listed as replacement for part numbers 803338, GPP-1MH-1P, HRIM-21-115)
• Power source: Corded electric; voltage listed as 115 volts and frequency 50/60 Hz
• Electrical specifics: Rated current 0.38A and listed speed 1550 RPM
• Physical size and weight: Item dimensions 8.5" L x 3.4" W x 4.3" H; weight listed as 3.19 lbs
• Materials called out: Material type listed as plastic; the listing also claims a stainless‑steel shaft and a thermally protected motor
• Outlet diameter: 5/8 inch (listed)
• Compatibility: Named compatible with many Ice‑O‑Matic models (see compatibility subsection below)
• Other listing notes: Listed color is black; the product style is described as "Modern Industrial Aesthetic" and the listing says the unit is compact and easy to install

Compatibility (models listed in the product listing)

The listing explicitly names a long list of compatible Ice‑O‑Matic models. If you’re shopping for a replacement, verify the exact model number on your machine against the listing. The listing names compatibility with models including: C20, C30, C40, C50, C60, EC200, EC300, EC400, EC500, EUC150, EUC20, EUC200, EUC200B3, EUC20B, ICE0250, ICE0250A, ICE0250W, ICE0320, ICE0400, ICE0400A, ICE0400W, ICE0500, ICE0500A, ICE0500R, ICE0500W, ICE0520, ICE125-S, ICE195-S, ICEU150, ICEU200, ICEU220, and ICEU300.

In daily use

The listing positions this part as the functional replacement for the pump responsible for moving water to the evaporator — the core mechanical task needed for ice formation. Owners who left feedback report that the part "fit" and "worked great" and that it returned their machines to normal ice production. That pattern appears in the positive themes from owner notes and is the strongest real‑world signal available: multiple buyers say the pump restored operation to their units.

Installation & field fit

The listing describes the unit as "compact and easy to install." That falls in line with the common owner theme that it "fit" their Ice‑O‑Matic models and brought machines "back to new." The listing also provides precise physical dimensions (8.5" x 3.4" x 4.3") and an outlet diameter of 5/8", both of which are useful measurements to match up during installation.

What to watch for during installation

• Compatibility: The manufacturer and listing provide an explicit compatibility list. Verify the model numbers on your machine match the listing before purchasing because compatibility is the central functional requirement.
• Outlet diameter: The listing states a 5/8" outlet diameter. If your existing pump uses a different hose or fitting size, you’ll need to confirm adapters or a different part.
• Electrical connection: The unit is corded electric and listed at 115 volts with 50/60 Hz frequency and a rated current of 0.38A. Confirm that your installation environment matches these electrical specifications in the listing.

Materials & build quality

Strictly from the listing, the 9161076-01 uses a plastic body (listed as Material Type: Plastic) and is described as having a stainless‑steel shaft. The listing also claims the motor is thermally protected. The physical dimensions and the listed weight (3.19 lbs) give a sense of scale — it’s a compact, lightweight pump motor package rather than a heavy industrial assembly.

Owners’ feedback aligns with the listing’s basic claim set: buyers reported that the part fit the machines and restored functionality. Those owner reports are the main available evidence of acceptable build quality in the real world; multiple buyers saying it "works great" and "fit" is a positive signal for basic material and manufacturing consistency for this part.

What the listing does not specify about materials

• Surface finishes, body polymer grade, or any food‑contact certification are not specified on the listing. The listing calls the housing "plastic" but does not name the specific polymer or list third‑party certifications for materials.
• The listing does not provide detailed lubrication, seal material information, or explicit IP/rating data for moisture resistance beyond the thermally protected motor claim.

Because the listing is explicit about the stainless‑steel shaft and the plastic body, treat those as the only material details confirmed by the listing; anything else the manufacturer might claim should be verified on the current product page or in manufacturer documentation.

Safety considerations

When replacing a pump in an ice maker you’re working around electrical parts and water — both warrant careful attention. The listing states the motor is thermally protected, which the listing describes as a safety and reliability feature. That is the primary safety‑related claim on the product page, along with the basic electrical specs (115V, 0.38A, 50/60Hz).

Positive safety signals from the listing

• Thermally protected motor (listed): The product description mentions the motor is thermally protected, presented by the listing as a safety feature.
• Stainless‑steel shaft (listed): The manufacturer claims a stainless‑steel shaft; stainless shafts typically resist corrosion better than some alternatives, which is useful in wet environments (this is a descriptive listing claim, not an independent verification).

What the listing does not specify (safety gaps)

• The listing does not name any third‑party electrical safety certifications (the listing doesn't specify UL, CE, or similar marks).
• The listing does not state a warranty period or detailed maintenance instructions.
• There is no listing statement about IP or ingress protection ratings for water exposure beyond the general design purpose.

Because those certification and warranty details are not in the listing, buyers should verify any certification or warranty claims on the active manufacturer listing or documentation. Also follow manufacturer installation guidance and local electrical codes when replacing a pump motor.

Who this is for / who should skip

This part is clearly aimed at people who need a direct replacement pump motor for one of the Ice‑O‑Matic models listed in the product description. The combination of the explicit compatibility list and the owner feedback pattern — "it fit" and "it works great" — positions this as a practical repair part for households or businesses that own a matching Ice‑O‑Matic machine.

Who this fits best

• Owners of Ice‑O‑Matic machines matching the model names listed in the product description who need a replacement pump motor.
• Shoppers who prefer a compact, corded pump motor described as easy to install (per the listing) and who can verify the electrical and outlet size match their unit (115V, 0.38A, 5/8" outlet).
• Buyers who value a direct OEM‑style replacement: the listing also cites replaceable part numbers (803338, GPP-1MH-1P, HRIM-21-115) to aid matching.

Who should skip or proceed cautiously

• Anyone with an ice maker model not explicitly named in the listing should not assume fit — the listing’s compatibility list is the primary guide.
• Shoppers who require documented third‑party safety certifications or a clearly stated warranty in the product description should verify those details, because the listing does not include certification or warranty text.
• Those who need detailed material certification for food‑contact components (the listing describes the body as plastic but does not give specific polymer or certification details) should check the manufacturer documentation before purchase.

Verdict

For owners of Ice‑O‑Matic models that match the listing, the JKLESA 9161076-01 looks like a straightforward, compact replacement pump option. The listing provides the exact dimensions, outlet size, electrical specs, and a long compatibility list — all critical facts you need to verify before purchasing. Owner feedback repeatedly states it "fits" and "works great," which is the most useful practical evidence available in real‑world use.

That said, the listing doesn’t include third‑party electrical certifications or a stated warranty period. The listing does claim a stainless‑steel shaft and a thermally protected motor, and those are positive materials/safety claims to weigh against the absence of certification language. If your priority is a quick parts replacement and the model numbers match, this listing gives the core facts needed to make an informed decision; if you require documented third‑party certifications or material documentation, verify those items with the seller or manufacturer before purchase.

Check before you buy (short checklist)

• Confirm your ice maker model number is listed among the compatible Ice‑O‑Matic models in the product description.
• Measure or verify the outlet/hose fitting on your existing pump — the listing states a 5/8" outlet diameter.
• Verify electrical compatibility: the listing states 115 volts, 50/60 Hz, rated current 0.38A.
• Confirm dimensions fit your mounting space: listing dimensions are 8.5" L x 3.4" W x 4.3" H and weight 3.19 lbs.
• Note the listing’s claim of a thermally protected motor and a stainless‑steel shaft, and verify any additional safety or warranty details you require on the seller/manufacturer page.
• The listing notes "Only 5 left in stock - order soon." If stock is important, check the live listing before purchase.

Colors available:

• black

Final note: owner's reports that the part "fit" and restored ice production are the clearest practical signals available. Use the checklist above to confirm fit and electrical requirements before you install. For certification, warranty, or detailed material verification, consult the current product listing or manufacturer documentation.